처음으로 펌웨어 업데이트 해보려고 하는데
sd카드 포멧후 업데이트 파일 옮겼고요
(info 버튼 누른후 전원 켜면 된다고 하는데_
m10-p는 info 버튼이 없어서요
어떻게 하는걸까요?
(근데 펌웨어하면 뭐가 좋아져요? ㅎㅎ)
https://cohabe.com/sisa/2692215
m10-p 펌웨어가 떴네요
- 품절 프리미엄 마캐팅 [9]
- giveashot | 2022/11/18 14:53 | 1683
- 오늘자 인천대교.JPG [21]
- 리치여장군 | 2022/11/18 14:52 | 990
- 오만방자한 윤석열 [29]
- UNOART | 2022/11/18 14:51 | 1032
- 후지의 장단점이 궁금합니다 [7]
- Gadget_Geek | 2022/11/18 14:48 | 708
- m10-p 펌웨어가 떴네요 [5]
- 펑키스트 | 2022/11/18 14:12 | 387
요번에 나온렌즈 프로필 추가됐네여 ㅎ
FIRMWARE UPDATES
Leica is continuously working on the further improvement and optimization of your camera. Since many camera functions are entirely controlled by software, some of these improvements and additions to the functional scope can be installed in retrospect.
Leica offers firmware updates at irregular intervals, which you can download from our website.
Leica will notify you of any new updates, once you h에이브이e registered your camera.
Find out which firmware version is currently installed
▸ Select Camera Information in the main menu • The current firmware version is displayed next to the menu item Camera Firmware.
More information about registering, firmware updates and how to download them to your camera, as well as any amendments and additions to this manual can be found in the customer area of our website at:
club.leica-camera.com
UPDATING THE CAMERA FIRMWARE
▸ Download the latest firmware version
▸ S에이브이e the download to the memory card
▸ Insert the memory card into the camera
▸ Switching the camera on
▸ Select Camera Information in the main menu
▸ Select Camera Firmware
EN
• This menu item is 에이브이ailable only if a current firmware file is stored on the inserted memory card.
• A prompt with information about the camera is displayed.
▸ Check the version information
▸ Select Yes
• The update will start automatically.
• Once the process has completed successfully, a relevant message will be displayed and the camera will restart.
Notes
• The camera must not be switched off before the update is completed.
• A warning message will appear if the battery is insufficiently charged. Please recharge the battery and then repeat the process described above.
UPDATING THE CAMERA FIRMWARE M10-D
▸ Preparation
▸ Press and hold the function button and switch on the camera • The update will start automatically.
• UP will appear in the viewfinder during the update process.
• In case of an error, Err will be displayed • End will appear after a successful update is completed.
Notes
• The camera must not be switched off before the update is completed.
• A warning message will appear if the battery is insufficiently charged. Recharge the battery and then repeat the process described above.
알려주셔서 방금 업데이트했습니다.
카드에 펌웨어 파일 넣고, 본체 삽입 후 메뉴 들어가서 카메라 정보 보시면 뭔가 빨간 느낌표가 떠있고, 그리로 들어가면 업데이트할 수 있게 해주네요.
새로나온 뷰파인더는 결국 10바디에서 적용은 안해 주나 보네요^^;;