1은 일반적인 손떨방
2는 세로 손떨방?? 이라고 들었는데
3은 처음보는기능이라..
렌즈 설명서도 없구해서 아시는분 기능 좀 알려주세요
https://cohabe.com/sisa/427006
장망원렌즈에 달린 is 3번째 모드는 뭐에요??
- 엄마가 해주는 최고의 응원 [5]
- 정의의 버섯돌 | 13분전 | 316
- 트릭컬) 엘드르! 찌찌 보여줘 [0]
- 26456878964 | 18분전 | 271
- 정치인이 가져야할 덕목.jpg [11]
- SCP-1879 방문판매원 | 18분전 | 1190
- 에미야 시로...그 쪽이 고유결계를 전개한다면.... [9]
- 조☆잘 | 22분전 | 289
- 생동성 알바 하다가 부작용 걸린 후기.jpg [12]
- MSBS-762N | 22분전 | 1128
- 내공으로 내장을 파열한다는 중국의 태극권 [0]
- MAD8 | 24분전 | 918
- [베스트펌] 해외네티즌 "수영 전, 샤워에 가장 엄격한 한국 수영장" 해외반응 [0]
- 투데이올데이 | 26분전 | 1134
- 오늘의 뉴스입니다 [7]
- 인류의悪 Empire | 30분전 | 318
Mode 1 image stabilization is practically a standard feature on lenses introduced at this time. I find IS to be a hugely valuable feature.
Mode 2 IS is used for panning with a subject. In this mode, only 1 axis of stabilization is provided - allowing the linearly-moving subject to be tracked.
The new mode 3 is used for tracking action. In mode 3, image stabilization is active and ready for use the moment the shutter releases, but actual stabilization is not in effect until that precise time. The view seen through the viewfinder is not stabilized. This means that you are able to follow your erratic subjects without fighting against image stabilization trying to prevent you from doing the same. IS Mode 3 is designed to detect panning motion and when detected will only apply Image Stabilization at right angles to the direction of the detected movement (like IS Mode 2).
ref: http://www.the-digital-picture.com/Reviews/Canon-EF-400mm-f-2.8-L-I...
자세하게 이해는 못했는데 일반적으로는 그냥 is 1모드로 쓰는게 낫겠네요 감사합니다
모드2는 y축만 잡아주고요. 그래서 좌우패닝할때 쓰면 됩니다.
모드3는 트래킹할때 쓰면 됩니다. 위아래좌우 모든 상황에서 움직일때요. 1하고 다른점은 1은 정적인 피사체를 찍을때 필요한정도의 스테이빌라이징되는 차이고 3은 더 적극적으로 작동한다고 생각하심 됩니다.
모드3은 노출시에만 손떨방이 작동합니다. 그래서 뷰파인더상에서는 손떨방이 작동 안하는것 처럼 보이지만 계속 움직이는 피사체를 추적하는 경우에는 이게더 낫죠. 근데 모드3으로 놓으면 동영상 촬영시에는 작동을 안하는듯..